קובץ:Microstrip-bandpass-filter.jpg

מתוך testwiki
קפיצה לניווט קפיצה לחיפוש
לקובץ המקורי (1,132 × 472 פיקסלים, גודל הקובץ: 130 ק"ב, סוג MIME‏: image/jpeg)

זהו קובץ מתוך ויקישיתוף וניתן להשתמש בו גם במיזמים אחרים. תיאורו בדף תיאור הקובץ שלו מוצג למטה.

תקציר

תיאור
Deutsch: Bandpassfilter mit Mikrostreifenleitern, der seitlich gekoppelte λ/2-Resonatoren verwendet. Die metallisierten Bohrungen an jeder Seite sind nicht Teil der Filterstruktur, sondern Teil des Gehäuses und dienen der Verbesserung der Isolation. Die Substratdicke beträgt ungefähr 0,5 mm und die Dicke der Metallisierung vielleicht 20 µm. Die Bandbreite liegt am unteren Ende des Ku-Bandes, deshalb muss die Dieelektrizitätskonstante des Substrates bei ca. 3,5 liegen. Für den Maßstab: Das Raster der Gehäuse-Bohrungen liegt genau bei 1 mm.
English: Bandpass filter in microstrip using edge-coupled halfwave resonators. The via fences on each side are not part of the filter, but form part of the enclosure. The substrate thickness is about 0.5mm, and the metallization thickness perhaps 20μm. The pass band is at the bottom of the Ku band, so the substrate dielectric constant must be about 3.5. For scale: the pitch of the via fences is precisely 1mm.
תאריך יצירה
מקור נוצר על־ידי מעלה היצירה
יוצר Catslash

רישיון

Public domain ברצוני, בעלי זכויות היוצרים על יצירה זו, לשחרר יצירה זו לנחלת הכלל. זה תקף בכל העולם.
יש מדינות שבהן הדבר אינו אפשרי על פי חוק, אם כך:
אני מעניק לכל אחד את הזכות להשתמש בעבודה זו לכל מטרה שהיא, ללא תנאים כלשהם, אלא אם כן תנאים כאלה נדרשים על פי חוק.

כיתובים

נא להוסיף משפט שמסביר מה הקובץ מייצג

פריטים שמוצגים בקובץ הזה

מוצג

image/jpeg

0.016666666666667 שנייה

4.1 מילימטר

132,619 בית

472 פיקסל

1,132 פיקסל

checksum אנגלית

34a7d60222530642608d343aeaf6a6822ef2c002

היסטוריית הקובץ

ניתן ללחוץ על תאריך/שעה כדי לראות את הקובץ כפי שנראה באותו זמן.

תאריך/שעהתמונה ממוזערתממדיםמשתמשהערה
נוכחית17:15, 29 באפריל 2010תמונה ממוזערת לגרסה מ־17:15, 29 באפריל 2010‪472 × 1,132‬ (130 ק"ב)wikimediacommons>Catslash{{Information |Description={{en|1=Bandpass filter in microstrip using edge-coupled halfwave resonators. The via fences on each side are not part of the filter, but form part of the enclosure. The substrate thickness is about 0.5mm, and the metallization t

הדף הבא משתמש בקובץ הזה: